Function Generator

FGA5050

FGA5050

150,000 (税込:165,000

  • Wide band frequency
    Sine waveform : 1 μHz to 50 MHz, Square waveform : 1 μHz to 25 MHz
  • Sine waveform, Square waveform, Ramp waveform, Triangle waveform, Pulse waveform, Noise waveform, DC, Arbitrary waveform output
  • Waveform editor application software “WAVEPATT” is included as standard
  • Various modulation types
    AM, FM, PM, FSK, PWM, Frequency sweep, Burst, External Modulation Input
  • 16 bits / up to 50 MHz pattern out
  • 14 bits / 256 k-point, 125 MSs/s
  • 10 MHz clock in and out
  • Trigger Input and Trigger output (TTL compatible)
  • Interface : LAN / USB standard

*Limited stock due to end of production.


LAN LXI
カート機能が動くまでの

Overview

The LXI interface makes easier for the test system!

The FGA5050 is a function generator that equips with the arbitrary waveform function. In addition to Sine waveform, Square waveform, Ramp wave- form of those custom waveform generation func- tion, the FGA5050 offers to realize high precision waveform with 1 μHz of resolution and 50 MHz of wideband frequency. The FGA5050 can be used in wide application such as “Voltage variation test for Automotive Electronic Components”, “ECU false signal source”, “Charge-Discharge test for the rechargeable battery”, “Ripple super-impose test” and it can be used as the trigger signal for the various type of test system. Further more, three types of interface, LAN / USB are equipped with the FGA5050 as standard feature, it applies for automated test along with manual operation.

Application

Voltage variation test for Automotive Electronic devices

Voltage variation test for Automotive Electronic devices

The system combined with the FGA5050 and the Bipolar power supply, it can be used as the “Signal Source” for the “Voltage variation test of the automotive electronic components” complied to the ISO standard and other manufacturer’s standard.

Measurement of the output impedance of the power supply

Measurement of the output impedance of the power supply

The system combined with the FGA5050, electronic load, and multi-meter, it can be used as the “Reference AC Signal” for the “Impedance measurement of power supply output”.

Specifications

General specifications

ZOOM
Input voltage rangeSingle-phase 100 Vac to 240 Vac, 50 Hz to 60 Hz , Single-phase 100 Vac to 120 Vac, 400 Hz
Power consumption80 VA max
Operating temperature range0 °C to 55 °C (80 %rh or less, no condensation)
Storage temperature range-30 °C to 70 °C (80 %rh or less, no condensation)
Operating altitudeUp to 2000 m
Dimensions (mm)/ Weight253W × 107H × 381D mm (9.96W × 4.21H × 15.0D inch)/ Approx. 4 kg(8.8 lb)
InterfaceLAN, USB, GPIB (factory option)
Accessories“Power cord” 1 pc. (with three-pronged plug), “Pattern generator cable” 1pc., “USB cable” 1pc., “CD-R”*1 1pc., “Packing list,safety precautions” 1 English, 1 Japanese, “China RoHS disclosure report” 1pc.
Electromagnetic compatibility (EMC)Complies with the requirements of the following directive and standard.
EMC Directive 2014/30/EU
EN 61326-1(Class A)
EN 55011(Class A, Group 1)
EN 61000-3-2, EN 61000-3-3
SafetyComplies with the requirements of the following directive and standard.
Low Voltage Directive 2014/35/EU
EN 61010-1(Class I, Pollution degree 2)

*1 including the “Operation Manual” and “Communication Interface Manual”.


Waveform characteristics

ZOOM
WaveformsStandard waveformsSine, square, ramp, triangle, pulse, noise, and DC
Arbitrary waveformsExponential rising wave, exponential falling wave, reverse ramp wave, sinc wave, and cardiac wave (cardiac electrogram wave)
Sine wavesFrequency1 μHz to 50 MHz
Amplitude flatness *1 *2 (relative to 1 kHz)Less than 100 kHz0.1 dB
Less than 5 MHz0.15 dB
Less than 20 MHz0.3 dB
Less than 50 MHz0.5 dB
Harmonic distortion *2 *3DC to 20 kHzLess than 1 Vpp-70 dBc
1 Vpp or more-70 dBc
20 kHz to 100 kHzLess than 1 Vpp-65 dBc
1 Vpp or more-60 dBc
100 kHz to 1 MHzLess than 1 Vpp-50 dBc
1 Vpp or more-45 dBc
1 MHz to 20 MHzLess than 1 Vpp-40 dBc
1 Vpp or more-35 dBc
20 MHz to 50 MHzLess than 1 Vpp-35 dBc
1 Vpp or more-30 dBc
Total harmonic distortionDC to 20 kHz0.5 Vpp or more0.06 % or less
Spurious *2 *4 (non-harmonic)DC to 1 MHz-70 dBc
1 MHz to 50 MHz-70 dBc + 6 dB/octave
Phase noise (10 kHz offset)1 MHz or more0.1 Vpp or moreTypically -115 dBc/Hz
Square wavesFrequency1 μHz to 25 MHz
Rising, falling timeLess than 10 ns
OvershootLess than 2 %
Variable duty cycleLess than 10 MHz20 % to 80 %
Less than 25 MHz40 % to 60 %
Asymmetry50 % duty cycle1 % of period + 5 ns
Jitter (RMS)0.1 Vpp or more
1 MHz or more
200 ps
Ramp and triangle wavesFrequency1 μHz to 200 kHz
LinearityLess than 0.1 % of the peak output
Symmetry0.0 % to 100.0 %
Pulse waveFrequency500 μHz to 10 MHz
Pulse width20 ns minimum
Resolution (period ≤ 10 s)10 ns
Variable edge timeLess than 10 ns to 100 ns
OvershootLess than 2 %
Jitter (RMS)0.1 Vpp or more
50 kHz or more
200 ps
Noise wavesBandwidthTypically 20 MHz
Arbitrary waveformsFrequency1 μHz to 10 MHz
Wavelength2 to 256 K points
Resolution14 bits (including the sign)
Sampling rate125 megasamples per second
Minimum rising or falling timeTypically 30 ns
LinearityLess than 0.1 % of the peak output
Settling timeUp to 0.5 % of the final valueLess than 250 ns
Jitter (RMS)6 ns + 30 ppm
Non-volatile memory50 % duty cycle4 waveforms, 256 K points per waveform

*1 Add 1/10th to the output amplitude and DC offset specifications per 1 oC for operations out-side the range of 18 oC to 28 oC. *2 When autoranging is enabled *3 DC offset set to 0 V *4 Spurious output at low amplitudes is typically -75 dBm.


Common waveform characteristics

ZOOM
FrequencyResolution1μHz
AmplitudeRange10 mVpp to 10 Vpp (50 Ω termination) , 20 mVpp to 20 Vpp (No termination)
Accuracy*1*2±1 % of setting ± 1 mVpp (At 1 kHz)
UnitsVpp, Vrms, and dBm
Resolution4 digits
DC offsetRange±5 V (50 Ω termination), ±10 V (No termination)
Accuracy*1*2±2 % of offset setting ±0.5 % of amplitude setting ±2 mV
Resolution4 digits
Main OutputImpedanceTypically 50 Ω
IsolationUp to 42 Vpk (From earth)
ProtectionShort-circuit protection, overload automatically stops output
Internal frequency referenceAccuracy*2±10 ppm (90 days), ±20 ppm (1 year)
External frequency reference inputLock range10 MHz ± 500 Hz
Level100 mVpp to 5 Vpp
ImpedanceTypically 1 kΩ (AC coupled)
Lock timeLess than 2 s
Frequency reference outputLevelTypically 632 mVpp (0 dBm)
ImpedanceTypically 50 Ω (AC coupled)
Phase offsetRange-360 ° to +360 °
Resolution0.001°
Accuracy8ns

*1 When autoranging is enabled *2 Add 1 ppm/1 oC (average) for operations outside the range of 18 ℃ to 28 ℃.


Types of modulation

ZOOM
Types of modulationModulationAM, FM, PM, FSK, PWM, sweep, and burst
AMCarrier waveSine, square, ramp, or arbitrary
Modulation signalInternal or external
Internal modulation signalSine, square, ramp, triangle, noise, or arbitrary
Internal modulation signal frequency range2 mHz to 20 kHz
Modulation depth0.0 % to 120.0 %
FMCarrier waveSine, square, ramp, or arbitrary
Modulation signalInternal or external
Internal modulation signalSine, square, ramp, triangle, noise, or arbitrary
Internal modulation signal frequency range2 mHz to 20 kHz
DeviationDC to 25 MHz
PMCarrier waveSine, square, ramp, or arbitrary
Modulation signalInternal or external
Internal modulation signalSine, square, ramp, triangle, noise, or arbitrary
Internal modulation signal frequency range2 mHz to 20 kHz
Deviation0.0 ° to 360 °
PWMCarrier wavePulse wave
Modulation signalInternal or external
Internal modulation signalSine, square, ramp, triangle, noise, or arbitrary
Internal modulation signal frequency range2 mHz to 20 kHz
Deviation0 % to 100 % of the pulse width
FSKCarrier waveSine, square, ramp, or arbitrary
Modulation signalInternal or external
Internal modulation signalSquare wave signal with a 50 % duty cycle
Internal modulation signal frequency range2 mHz to 100 kHz
External Modulation Input*1Input voltage range±5 V full scale
Input resistanceTypically 8.7 kΩ
BandwidthDC to 20 kHz
SweepWaveformsSine, square, ramp, or arbitrary
MethodLinear and logarithmic
DirectionUp, down
Sweep time1 ms to 500 s
TriggerInternal, external, or manual
MarkerThe falling edge of the sync output signal
BurstWaveforms*2Sine, square, ramp, triangle, noise, or arbitrary
MethodInternal or external
Starting and ending phases-360 ° to +360 °
Internal period1 μs to 500 s
Gate signalExternal
Trigger signalInternal, external, or manual
Trigger inputInput levelTTL compatible
SlopeSelect rising or falling
Pulse widthGreater than 100 ns
ImpedanceGreater than 10 kΩ (DC coupling)
LatencyLess than 500 ns
Trigger outputOutput LevelTTL equivalent (load of 1 kΩ or more)
Pulse widthGreater than 400 ns
ImpedanceTypically 50 Ω
Maximum speed1 MHz
Fan-outUp to 4 FGA5050s

*1 FSK modulation uses the Trig In/Out, FSK/Burst connector (the maximum frequency is 1 MHz). *2 Sine and square waveforms above 10 MHz are can only be used with an infinite burst count.


Pattern Mode Characteristic

ZOOM
OutputMaximum clock speed50 MHz
Output LevelTTL equivalent (load of 2 kΩ or more)
Output ImpedanceTypically 110 Ω
Pattern Length2 to 256 K points

Product Catalog

Operation Manuals

FGA5050
Icon

    Please feel free to contact us with any questions or concerns.

    Download a Product Catalog View List
    Request a Quotation Contact Us
    close

    Search

    Entering the model number, capacity, etc.