| Model | PLZ205W | PLZ405W | PLZ1205W |
|---|---|---|---|
| Operating voltage | 0.25 V to 150 V *1 | ||
| Current *2 | 40 A | 80 A | 240 A *3 |
| Power | 200W | 400W | 1200W |
| The minimum operating voltage | approximately 0.05 V. (At the load input terminals on the rear panel.) | ||
| Input resistance when the load is off | Approx. 660 kΩ *4 | ||
| Load input terminal’s isolation voltage | ±500 V | ||
*1 In switching mode, for every slew rate setting of 1 A/μs, the minimum operating voltage (including the voltage drop due to the wiring inductance component) increases by approx. 150 mV for the PLZ205W, approx. 125 mV for the PLZ405W, and approx. 75 mV for the PLZ1205W. *2 If the input voltage is 1 V or less, the current is reduced by 10% per 0.1 V. *3 80 A for the load input terminals on the front panel. The specifications of the PLZ-5W are for the load input terminals on the rear panel and the load input terminals on the front panel may not meet the specifications. *4 In the case of parallel operation using the same models, approx. 660/number of units kΩ.
