Resolution : 6 1/2 digit Display : 5 x 7 dot matrix VFD, dual display with 3-color Basic measurement functionDC voltage : 0.1 V, 1 V, 10 V, 100 V, 1000 V AC voltage : 0.1 V, 1 V, 10 V, 100 V, 750 V DC current : 10 mA, 100 mA, 1 A, 3 A AC current : 1 A, 3 A 2-wire / 4-wire resistance : 100 Ω, 1...

Slew rate of 2.4 A/μs in the rising and falling edges in CC mode (PLZ150U) Built-in three ranges; voltmeter, ammeter, and wattmeter functions that provide readings of up to five digits The current slew rate can be changed continuously in constant current and constant resistance modes Supports 0-...

User-defined waveform generation function Sequence function Synchronized operation function Central control with master unit utilizing master and slave operation Master unit display of total output current of all units (display of combined value) *1 Safety design that switches all units of...

User-defined waveform generation function Sequence function Synchronized operation function Central control with master unit utilizing master and slave operation Master unit display of total output current of all units (display of combined value) *1 Safety design that switches all units of...

Peak current 6x rating (±120 Apk CV) Parallel operation up to 10 units (Max 1200 Apk) * Please consult if using 11 units or more. CV frequency: 150 kHz DC Waveform generation function Sequence function Synchronized operation function(Trigger-based, Clock-based) Bipolar / Unipolar Mode Lo...

Waveform generation function Sequence function Synchronized operation function(Trigger-based, Clock-based) Parallel operation function (Applied to the same model for 2 units in parallel connection) Unipolar mode High-speed response Low ripple noise(CV mode)

Full load 100A at 0.3V (PLZ334WL) *Minimum operating start voltage is 50mV High slew rate of 50A/µs even at 2.3V load voltage (rise/fall time conversion: 2µs) Minimum current setting resolution 50μA (L range) Six operating modes are supported (constant current, constant resist...

3-channel voltage standard(COM of 3-channel in common)] CH1: 0 to +6 V/200 mA CH2: 0 to +6 V/30 mA CH3: 0 to +6 V/ 30 mA Remote sensing function that compensates for voltage drops at the output terminal Best suited to operation tests for VCO and many other types of sens...

Measures leakage current in 3 operation modes: Touch Current (TC), Protective Conductor Current (PCC), and METER operation mode Eight types of measuring circuit networks are incorporated in the tester for measuring the touch current of general electrical apparatuses Possible to mea...

Test current value: 3 A to 30 A AC/Resistance value: 0.001 Ω to 1.200 Ω Can be determined by resistance and voltage drop Offset cancelling function Stores 100 test conditions in memory Incorporates test conditions into program Contact check function Equipped with standard GPIB and RS232C ...

Test current value: 6 A to 60 A AC / Resistance value: 0.001 Ω to 0.600 Ω Voltage drop-based judgment function Offset cancelling function Stores 100 test conditions in memory Incorporates test conditions into program Contact check function Equipped with standard GPIB and RS232C int...

No need for a PC for compliance testing Supports IEC 61000-3-2 Ed 5.0 (2018) for harmonics standards and IEC 61000-3-3 Ed 3.1 (2017) for flicker standards. The screen can be easily switched between Japanese and English display. With/without/with (2nd and higher orders) inter-order harmonic measu...

Converts RS232C or USB interface to IEEE488.2 GPIB Easily connected with no driver required Communication conditions can be changed in custom mode

Equipment to be tested is single-phase/three-phase equipment (40 A/phase). Supports IEC 61000-3-2 Ed 5.0 (2018) for harmonics standards and IEC 61000-3-3 Ed 3.1 (2017) for flicker standards. The screen can be easily switched between Japanese and English display. With/without/with (2nd and hi...

Wide band frequencySine waveform : 1 μHz to 50 MHz, Square waveform : 1 μHz to 25 MHz Sine waveform, Square waveform, Ramp waveform, Triangle waveform, Pulse waveform, Noise waveform, DC, Arbitrary waveform output Waveform editor application software "WAVEPATT" is included as standar...