PBZ BP Series

Intelligent Bipolar Power Supply

PBZ BP Series

PBZ BP

5,540,000円 – 8,300,000円

  • User-defined waveform generation function
  • Sequence function
  • Synchronized Operation
  • Master unit display of total output current of all units (display of combined value) *1
  • Safety design that switches all units off when alarm is generated for 1 unit *2
  • LAN (Capable of LXI), USB, GPIB, and RS232C provided (standard)
  • 80kHz frequency characteristic (CV)

*1 Slave unit displays its own output current. *2 If the alarm for the master unit is cleared, alarms for all units are cleared.


LAN LXILAN LXIUKCA
Login to myKIKUSUI / What is myKIKUSUI?
Request for Quotation
ImageSKUOutput CV [V]Output CC [A]標準価格WEBかんたんお見積り
PBZ20-120 BP20V1205,540,000円
（税込：6,094,000円）
PBZ40-60 BP40V605,540,000円
（税込：6,094,000円）
PBZ20-140 BP20V1406,230,000円
（税込：6,853,000円）
PBZ40-70 BP40V706,230,000円
（税込：6,853,000円）
PBZ20-160 BP20V1606,920,000円
（税込：7,612,000円）
PBZ40-80 BP40V806,920,000円
（税込：7,612,000円）
PBZ20-180 BP20V1807,610,000円
（税込：8,371,000円）
PBZ40-90 BP40V907,610,000円
（税込：8,371,000円）
PBZ20-200 BP20V2008,300,000円
（税込：9,130,000円）
PBZ40-100 BP40V1008,300,000円
（税込：9,130,000円）
SKU: PBZ BP

Line-up

ImageSKUOutput CV [V]Output CC [A]標準価格WEBかんたんお見積り
PBZ20-120 BP20V1205,540,000円
（税込：6,094,000円）
PBZ40-60 BP40V605,540,000円
（税込：6,094,000円）
PBZ20-140 BP20V1406,230,000円
（税込：6,853,000円）
PBZ40-70 BP40V706,230,000円
（税込：6,853,000円）
PBZ20-160 BP20V1606,920,000円
（税込：7,612,000円）
PBZ40-80 BP40V806,920,000円
（税込：7,612,000円）
PBZ20-180 BP20V1807,610,000円
（税込：8,371,000円）
PBZ40-90 BP40V907,610,000円
（税込：8,371,000円）
PBZ20-200 BP20V2008,300,000円
（税込：9,130,000円）
PBZ40-100 BP40V1008,300,000円
（税込：9,130,000円）

Specifications

AC input, rated output

Open in a new windowZOOM
Item/ModelPBZ20-120 BPPBZ20-140 BPPBZ20-160 BPPBZ20-180 BPPBZ20-200 BP
Input ratingNominal input voltage200 Vac to 240 Vac, single phase200 Vac, single phase
Voltage range180 Vac to 250 Vac180 Vac to 220 Vac
Frequency range47 Hz to 63 Hz
Current30 Aac or less35 Aac or less40 Aac or less45 Aac or less50 Aac or less
Inrush current240 Apeak or less280 Apeak or less320 Apeak or less360 Apeak or less400 Apeak or less
Power5400 VA or less6300 VA or less7200 VA or less8100 VA or less9000 VA or less
Power factor0.95 TYP (when the input voltage is 200 V)
Output ratingPower2400 W2800 W3200 W3600 W4000 W
Voltage±20 V
Current±120 A±140 A±160 A±180 A±200 A
Output terminalOutput terminalRear-panel output terminals (OUTPUT1, OUTPUT2)
Isolation voltage300 Vdc Only the output’s COM terminal can be grounded.
 
Item/ModelPBZ40-60 BPPBZ40-70 BPPBZ40-80 BPPBZ40-90 BPPBZ40-100 BP
Input ratingNominal input voltage200 Vac to 240 Vac, single phase200 Vac, single phase
Voltage range180 Vac to 250 Vac180 Vac to 220 Vac
Frequency range47 Hz to 63 Hz
Current30 Aac or less35 Aac or less40 Aac or less45 Aac or less50 Aac or less
Inrush current240 Apeak or less280 Apeak or less320 Apeak or less360 Apeak or less400 Apeak or less
Power5400 VA or less6300 VA or less7200 VA or less8100 VA or less9000 VA or less
Power factor0.95 TYP (when the input voltage is 200 V)
Output ratingPower2400 W2800 W3200 W3600 W4000 W
Voltage±40 V
Current±60 A±70 A±80 A±90 A±100 A
Output terminalOutput terminalRear-panel output terminals (OUTPUT1, OUTPUT2)
Isolation voltage300 Vdc Only the output’s COM terminal can be grounded.

Constant voltage (CV mode)

Open in a new windowZOOM
Item/ModelPBZ20-120 BPPBZ20-140 BPPBZ20-160 BPPBZ20-180 BPPBZ20-200 BP
DC voltageSetting range*1Bipolar mode0 V to ±(105 % of rating)
Unipolar mode0 V to +(105 % of rating)
Fine feature±5 % of rating
Setting resolution0.001 V (0.0001 V for the fine feature)
Setting accuracy*2±(0.05 % of setting + 0.05 % of rating)
Temperature coefficient±100 ppm / °C of rating (TYP)
AC voltageVoltageSetting range*10.00 Vp-p to (210 % of rating) p-p
Setting resolution0.1 V
Accuracy of setting*3±0.5 % of rating
FrequencySelectable range0.01 Hz to 100.00 kHz
Constant voltage characteristicsFrequency response *4DC to 80 kHz ( -3 dB) (TYP)
Response *5 (TYP)3.5 μs, 10 μs, 35 μs, 100 μs
Overshoot *65 % or less (TYP)
Ripple noise（p-p）50 mV (TYP)
（rms）6 mV
Load regulation *7±（0.005 % of setting + 1 mV）
Line regulation *8±（0.005 % of setting + 1 mV）
 
Item/ModelPBZ40-60 BPPBZ40-70 BPPBZ40-80 BPPBZ40-90 BPPBZ40-100 BP
DC voltageSetting range*1Bipolar mode0 V to ±(105 % of rating)
Unipolar mode0 V to +(105 % of rating)
Fine feature±5 % of rating
Setting resolution0.001 V (0.0001 V for the fine feature)
Setting accuracy*2±(0.05 % of setting + 0.05 % of rating)
Temperature coefficient±100 ppm / °C of rating (TYP)
AC voltageVoltageSetting range*10.00 Vp-p to (210 % of rating) p-p
Setting resolution0.1 V
Accuracy of setting*3±0.5 % of rating
FrequencySelectable range0.01 Hz to 100.00 kHz
Constant voltage characteristicsFrequency response *4DC to 80 kHz ( -3 dB) (TYP)
Response *5 (TYP)3.5 μs, 10 μs, 35 μs, 100 μs
Overshoot *65 % or less (TYP)
Ripple noise（p-p）50 mV (TYP)
（rms）12 mV
Load regulation *7±（0.005 % of setting + 1 mV）
Line regulation *8±（0.005 % of setting + 1 mV）

Constant current (CC mode)

Open in a new windowZOOM
Item/ModelPBZ20-120 BPPBZ20-140 BPPBZ20-160 BPPBZ20-180 BPPBZ20-200 BP
DC currentSelectable rangeBipolar mode0 A to ± (105 % of rating)
Unipolar mode0 A to ± (105 % of rating)
Fine feature±5 % of rating
Resolution *90.006 A0.007 A0.008 A0.009 A0.010 A
Fine feature0.0006 A0.0007 A0.0008 A0.0009 A0.0010 A
Setting accuracy *2±0.5 % of rating
Temperature coefficient±100 ppm / °C of rating (TYP)
AC currentCurrentSelectable range0 App to (210 % of rating) p-p
Resolution *90.06 A0.07 A0.08 A0.09 A0.10 A
Accuracy *10±0.5 % of rating
FrequencySelectable range0.01 Hz to 100.00 kHz
Constant current characteristicsFrequency response *11DC to 8 kHz (-3 dB) (TYP)
Response *12 (TYP)35 μs, 100 μs, 350 μs, 1 ms
Overshoot *135 % or less (TYP)
Ripple noise (rms)10 mA
Load regulation *14±（0.01 % of setting + 1 mA）
Line regulation *15±（0.01 % of setting + 1 mA）
 
Item/ModelPBZ40-60 BPPBZ40-70 BPPBZ40-80 BPPBZ40-90 BPPBZ40-100 BP
DC currentSelectable rangeBipolar mode0 A to ± (105 % of rating)
Unipolar mode0 A to ± (105 % of rating)
Fine feature±5 % of rating
Resolution *90.006 A0.007 A0.008 A0.009 A0.010 A
Fine feature0.0006 A0.0007 A0.0008 A0.0009 A0.0010 A
Setting accuracy *2±0.3 % of rating
Temperature coefficient±100 ppm / °C of rating (TYP)
AC currentCurrentSelectable range0 App to (210 % of rating) p-p
Resolution *90.06 A0.07 A0.08 A0.09 A0.10 A
Accuracy *10±0.5 % of rating
FrequencySelectable range0.01 Hz to 100.00 kHz
Constant current characteristicsFrequency response *11DC to 4 kHz (-3 dB) (TYP)
Response *12 (TYP)70 μs, 100 μs, 350 μs, 1 ms
Overshoot *135 % or less (TYP)
Ripple noise (rms)10 mA
Load regulation *14±（0.01 % of setting + 1 mA）
Line regulation *15±（0.01 % of setting + 1 mA）

AC common characteristics

Open in a new windowZOOM
Item/ModelPBZ20-120 BPPBZ20-140 BPPBZ20-160 BPPBZ20-180 BPPBZ20-200 BP
Frequency resolution0.01 Hz
Frequency setting accuracy±200 ppm
Frequency AccuracyLinear and logarithmic
WaveformsTypeSine wave, square wave, triangle wave, and 16 user-defined arbitrary waveforms
Start phase0 to 359°
Square wave duty cycle0.1 % to 99.9 %, resolution 0.1 % (f < 100 Hz), 1 % to 99 %, resolution 1 % (100 Hz ≤ f < 1 kHz), 10 % to 90 %, resolution 10 % (1 kHz ≤ f < 10 kHz), and fixed to 50 % (10 kHz ≤ f)
 
Item/ModelPBZ40-60 BPPBZ40-70 BPPBZ40-80 BPPBZ40-90 BPPBZ40-100 BP
Frequency resolution0.01 Hz
Frequency setting accuracy±200 ppm
Frequency AccuracyLinear and logarithmic
WaveformsTypeSine wave, square wave, triangle wave, and 16 user-defined arbitrary waveforms
Start phase0 to 359°
Square wave duty cycle0.1 % to 99.9 %, resolution 0.1 % (f < 100 Hz), 1 % to 99 %, resolution 1 % (100 Hz ≤ f < 1 kHz), 10 % to 90 %, resolution 10 % (1 kHz ≤ f < 10 kHz), and fixed to 50 % (10 kHz ≤ f)

*1 However, the peak value of the combined DC voltage and superimposed AC amplitude is limited to the DC voltage setting range. *2 At 23 °C ± 5 °C *3 Up to 2 parallel: 1 kHz sine wave, response 3.5 us, no load *4 Frequency at which the ratio of external signal input voltage amplitude to output voltage amplitude is -3 dB *5 Rise/fall time at rated load excluding OUT ON/OFF. Indicates the rise/fall time at rated load excluding OUT ON/OFF. The frequency response also changes in relation to the frequency band = 0.35/rising time by switching the response. When the output voltage setting is changed from 0% to 100% of the rating, the rise time is the time taken for the output voltage to change from 10% to 90% of the rating. When the output voltage setting is changed from 100% to 0% of the rating, the time taken for the output voltage to change from 90% to 10% of the rating is the fall time. *6 At no load or rated load *7 Output voltage variation value for 0-100 % variation of output current rating (at sensing end using remote sensing) *8 Output voltage variation value for ±10 % variation of nominal input voltage (at sensing end using remote sensing) *9 Can be set at 0.01 A but may not switch at 0.01 A due to the resolution of the built-in DA. *10 100 Hz sine wave, response 35 us, at short circuit *11 Frequency at which the ratio between external signal input voltage amplitude and output current amplitude is -3 dB (reference frequency 100 Hz sine wave, response 35 us, at rated load). The frequency response depends on the load impedance. It decreases with increasing load impedance. *12 OUT Rise/fall time at rated load excluding ON/OFF. When the output current setting is changed from 0% to 100% of the rating, the rise time is the time taken for the output current to change from 10% to 90% of the rating. When the output current setting is changed from 100% to 0% of the rating, the fall time is the time the output current changes from 90% to 10% of the rating. The rise/fall time depends on the load impedance. *13 At short-circuit or rated load *14 Output current variation value for a 10% to 100% change in output voltage rating *15 Output current variation value for a ±10% change in nominal input voltage (output voltage at 10% to 100% of rating)

Measuring Functions

Open in a new windowZOOM
Item/ModelPBZ20-120 BPPBZ20-140 BPPBZ20-160 BPPBZ20-180 BPPBZ20-200 BP
Voltage measurement (DC)Measurement range120 % of rating
Resolution0.001 V
Accuracy *1± (0.05 % of rdng + 0.05 % of rtg)
Voltage measurement (AC and DC + AC)Measurement rangeAC120 % of rating/CF
DC＋AC120 % of rating
Resolution0.001 V
Accuracy*1*25 Hz<f≦10 kHz±（0.5 % of reading ＋ 0.1 % of rating）
10 kHz<f≦50 kHz±（1 % of reading ＋ 0.2 % of rating）
50 kHz<f≦100 kHz±（2 % of reading ＋ 0.2 % of rating）
Voltage measurement (PEAK)Measurement range120 % of rating
Resolution0.01 V
Accuracy *1*3±0.5 % of rating
Current measurement (DC)Measurement range120 % of rating
Resolution0.006 A0.007 A0.008 A0.009 A0.010 A
Accuracy *1±（0.3 % of reading+1.6 % of rating）±（0.3 % of reading+1.9 % of rating）±（0.3 % of reading+2.2 % of rating）±（0.3 % of reading+2.5 % of rating）±（0.3 % of reading+2.8 % of rating）
Temperature coefficient± (150 ppm / °C of rating) (TYP)
Current measurement (AC, DC + AC)Measurement rangeAC120 % of rating/CF
DC＋AC120 % of rating
Resolution0.006 A0.007 A0.008 A0.009 A0.010 A
Accuracy*1*25 Hz<f≦10 kHz±（3 % of reading ＋ 0.1 % of rating）
10 kHz<f≦50 kHz±（10 % of reading ＋ 1 % of rating）
Current measurement (PEAK)Measurement range120 % of rating
Resolution0.06 A0.07 A0.08 A0.09 A0.10 A
Accuracy *1*3±0.5 % of rating
Measurement time (Aperture)100 μs to 3600 s
 
Item/ModelPBZ40-60 BPPBZ40-70 BPPBZ40-80 BPPBZ40-90 BPPBZ40-100 BP
Voltage measurement (DC)Measurement range120 % of rating
Resolution0.001 V
Accuracy *1± (0.05 % of rdng + 0.05 % of rtg)
Voltage measurement (AC and DC + AC)Measurement rangeAC120 % of rating/CF
DC＋AC120 % of rating
Resolution0.001 V
Accuracy*1*25 Hz<f≦10 kHz±（0.5 % of reading ＋ 0.1 % of rating）
10 kHz<f≦50 kHz±（1 % of reading ＋ 0.2 % of rating）
50 kHz<f≦100 kHz±（2 % of reading ＋ 0.2 % of rating）
Voltage measurement (PEAK)Measurement range120 % of rating
Resolution0.01 V
Accuracy *1*3±0.5 % of rating
Current measurement (DC)Measurement range120 % of rating
Resolution0.006 A0.007 A0.008 A0.009 A0.010 A
Accuracy *1±（0.3 % of reading+1.6 % of rating）±（0.3 % of reading+1.9 % of rating）±（0.3 % of reading+2.2 % of rating）±（0.3 % of reading+2.5 % of rating）±（0.3 % of reading+2.8 % of rating）
Temperature coefficient± (150 ppm / °C of rating) (TYP)
Current measurement (AC, DC + AC)Measurement rangeAC120 % of rating/CF
DC＋AC120 % of rating
Resolution0.006 A0.007 A0.008 A0.009 A0.010 A
Accuracy*1*25 Hz<f≦10 kHz±（3 % of reading ＋ 0.1 % of rating）
10 kHz<f≦50 kHz±（10 % of reading ＋ 1 % of rating）
Current measurement (PEAK)Measurement range120 % of rating
Resolution0.06 A0.07 A0.08 A0.09 A0.10 A
Accuracy *1*3±0.5 % of rating
Measurement time (Aperture)100 μs to 3600 s

Protective functions and interfaces

Open in a new windowZOOM
Protection functionsOvervoltage protection, Overcurrent protection, Overheat protection, Power limit (sink power)
InterfaceRS232C, GPIB, USB, LAN

General specifications

Open in a new windowZOOM
Item/ModelPBZ20-120 BPPBZ20-140 BPPBZ20-160 BPPBZ20-180 BPPBZ20-200 BP
Operating temperature range0 °C to 40 °C (32 °F to 104 °F)
Operating humidity range20 %rh to 85 %rh (no condensation)
Storage temperature range-25 °C to +70 °C (-13 °F to +158 °F)
Storage humidity range90 %rh or less (no condensation)
Insulation resistanceBetween the primary circuit and the output terminals500 Vdc, 30 MΩ or greater (at 70 %rh humidity or less)
Between the primary circuit and chassis
Between the output terminals and chassis300 Vdc, 0.17 MΩ or more300 Vdc, 0.14 MΩ or more300 Vdc, 0.13 MΩ or more300 Vdc, 0.11 MΩ or more300 Vdc, 0.1 MΩ or more
Withstanding voltageBetween the primary circuit and the output terminalsNo abnormalities at 1500 Vac for 1 minute
Between the primary circuit and chassis
Leakage current (250 V, 60 Hz) *515 mA or less
Earth continuity100 Aac, 0.1 Ω or less
Cooling systemForced air cooling using a heat sensing variable speed fan.
Battery backupSettings are retained when the power is off. At least three years of battery life (at 25 °C).
WeightApprox. 265 kg (584.2 lbs)Approx. 290 kg (639.3 lbs)Approx. 310 kg (683.4 lbs)Approx. 350 kg (771.6 lbs)Approx. 370 kg (815.7 lbs)
Dimensions (mm(inch))(maximum dimensions)570(22.44″) W× 1350(53.15″)H× 950(37.40″)Dmm (inches)570(22.44″) W× 1350(53.15″)H× 950(37.40″)Dmm (inches)570(22.44″) W× 1350(53.15″)H× 950(37.40″)Dmm (inches)570(22.44″) W× 1750(68.90″)H× 950(37.40″)Dmm (inches)570(22.44″) W× 1750(68.90″)H× 950(37.40″)Dmm (inches)
AccessoriesPBZ-SR series manuals: Setup Guide (1 pc.), Quick Reference (Japanese: 1 pc / English: 1 pc.), Safety Information (1 pc.)
J1 connector kit: Socket (1 pc.), Protection covers (2 pairs), Pins (30 pc.)
Heavy object warning label (1 pc.), CD-ROM (1 pc.)
 
Item/ModelPBZ40-60 BPPBZ40-70 BPPBZ40-80 BPPBZ40-90 BPPBZ40-100 BP
Operating temperature range0 °C to 40 °C (32 °F to 104 °F)
Operating humidity range20 %rh to 85 %rh (no condensation)
Storage temperature range-25 °C to +70 °C (-13 °F to +158 °F)
Storage humidity range90 %rh or less (no condensation)
Insulation resistanceBetween the primary circuit and the output terminals500 Vdc, 30 MΩ or greater (at 70 %rh humidity or less)
Between the primary circuit and chassis
Between the output terminals and chassis300 Vdc, 0.17 MΩ or more300 Vdc, 0.14 MΩ or more300 Vdc, 0.13 MΩ or more300 Vdc, 0.11 MΩ or more300 Vdc, 0.1 MΩ or more
Withstanding voltageBetween the primary circuit and the output terminalsNo abnormalities at 1500 Vac for 1 minute
Between the primary circuit and chassis
Leakage current (250 V, 60 Hz) *515 mA or less
Earth continuity100 Aac, 0.1 Ω or less
Cooling systemForced air cooling using a heat sensing variable speed fan.
Battery backupSettings are retained when the power is off. At least three years of battery life (at 25 °C).
WeightApprox. 265 kg (584.2 lbs)Approx. 290 kg (639.3 lbs)Approx. 310 kg (683.4 lbs)Approx. 350 kg (771.6 lbs)Approx. 370 kg (815.7 lbs)
Dimensions (mm(inch))(maximum dimensions)570(22.44″) W× 1350(53.15″)H× 950(37.40″)Dmm (inches)570(22.44″) W× 1350(53.15″)H× 950(37.40″)Dmm (inches)570(22.44″) W× 1350(53.15″)H× 950(37.40″)Dmm (inches)570(22.44″) W× 1750(68.90″)H× 950(37.40″)Dmm (inches)570(22.44″) W× 1750(68.90″)H× 950(37.40″)Dmm (inches)
AccessoriesPBZ-SR series manuals: Setup Guide (1 pc.), Quick Reference (Japanese: 1 pc / English: 1 pc.), Safety Information (1 pc.)
J1 connector kit: Socket (1 pc.), Protection covers (2 pairs), Pins (30 pc.)
Heavy object warning label (1 pc.), CD-ROM (1 pc.)

*1 At 23 °C±5 °C *2 At an input with a crest factor of 3 or less in the 100 Hz band (measurement time is 10 times or more the input period) *3 Calibration at 1 kHz, sine wave height *4 Ambient temperature 70 %RH or less *5 At 200 V/60 Hz for PBZ20-200 BP and PBZ40-100 BP

Product Catalog

Icon
Intelligent Bipolar Power Supply - PBZSeries
Download

    Operation Manuals

    Icon
    PBZ_BP
    Download

      2D CAD

      PBZ20-200 BP

      Outline | DXF
      Icon
      738.44 KB
      Download
      Icon
      Outline | DXF
      Download
      Outline | PDF
      Icon
      556.00 KB
      Download
      Icon
      Outline | PDF
      Download

        For other PBZ BP series, please contact us.

        Technical Data

        Icon
        PBZ Series - Characteristics Data
        LOGIN REQUIRED

          Please feel free to contact us with any questions or concerns.

          Download a Product CatalogView List
          Request a QuotationContact Us

          KIKUSUI Holdings

          EMZ

          Language
          © KIKUSUI ELECTRONICS CORP 2025.
          Privacy Policy |