販売中止 ［1997年10月以前］ 代替機種：なし

Capable of measuring impedance in the frequency range from 10mHz to 20kHz Power capacity: 1000W, 200A, load input terminal: 1.5V to 150V (KFM2150 system 1000-01) 660W, 132A, load input terminal: 0V to 150V (KFM2150 system 660-01A) Parallel operation can be configured with the same model of PLZ-4W series which enhances current capacity and power capacity Measuring AC current can be set from 0.1% to 10% (0.1% unit) of DC load current Capable of varying DC load current while keeping measuring AC current setting (%) Capable of IR measurement with the current interrupt method Equipped with low voltage protection Communication interfaces are equipped as standard (RS-232C, GPIB, USB) Out of stock

Operating voltage: 1.5 to 150 V Current: 400 A Power: 2000 W Input power supply voltage range: 100 to 240 VAC (90 to 250 VAC), single-phase connection Power consumption: Max. 200 VA Weight: Approx. 23 kg Dimensions: 429.5 (455) mm W × 128 (150) mm H × 550 (600) mm D

Capable of impedance measurement that is up to 150 V of input voltage when connected to KFM2150 with the dedicated cable Capable of 32 ch/unit input, and it is expandable to 160 ch in a parallel connection Capable of voltage and impedance measurement of arbitrary cells in a single connection due to the function that allows the ability to change the allocated terminal of the channel Capable of setting OVP and UVP to each channel Capable of voltage monitoring with the 32 channels/sec. of the scanning speed Capable of an individual operation as voltage monitoring Dimensions:430W × 44H × 270D mm / Weight:3.5kg

Tester for EDLC (Electric Double Layer Capacitor) test Fully independent channel operations LAN interface handles setting, operation and data collection Capable of measuring voltage of reference electrode Centralized management by dedicated application software Data sampling at 1 ms or 100 ms

Tester for EDLC (Electric Double Layer Capacitor) test Fully independent channel operations LAN interface handles setting, operation and data collection Capable of measuring voltage of reference electrode Centralized management by dedicated application software Data sampling at 1 ms or 100 ms

Tester for EDLC (Electric Double Layer Capacitor) test Fully independent channel operations LAN interface handles setting, operation and data collection Capable of measuring voltage of reference electrode Centralized management by dedicated application software Data sampling at 1 ms or 100 ms

Tester for EDLC (Electric Double Layer Capacitor) test Fully independent channel operations LAN interface handles setting, operation and data collection Capable of measuring voltage of reference electrode Centralized management by dedicated application software Data sampling at 1 ms or 100 ms

Charge/Discharge power supply unit PFX2011 or 2021 Control unit Unit frame for Charge/Discharge power supply unit Application software Accessories including alligator clip load cable

Charge/Discharge power supply unit PFX2011 or 2021 Control unit Unit frame for Charge/Discharge power supply unit Application software Accessories including alligator clip load cable

5-unit frame

Charging/discharging power supply unit

CC pulse discharging mode intended for load patterns of cellular phones and other devices CP pulse discharging mode intended for load patterns of digital cameras and notebook PCs (PFX2021) Temperature measurement function Synchronized operation with thermostatic chamber Equipped with a V/F converter that ensures more accurate current measurement at pulse discharge (PFX2021) Power regeneration function (PFX2021) Expandable on a unit-by-unit basis Allows PFX2011 and PFX2021 to coexist in a single frame

CC pulse discharging mode intended for load patterns of cellular phones and other devices CP pulse discharging mode intended for load patterns of digital cameras and notebook PCs (PFX2021) Temperature measurement function Synchronized operation with thermostatic chamber Equipped with a V/F converter that ensures more accurate current measurement at pulse discharge (PFX2021) Power regeneration function (PFX2021) Expandable on a unit-by-unit basis Allows PFX2011 and PFX2021 to coexist in a single frame

Capable of high-precision measurement of cumulative capacities and amount of power as well as voltage and current Pattern charging/discharging capabilities by 10000 steps are installed (for PFX2512, 2532) Supporting temperature measurement and capable of monitoring temperatures during charging/discharging Fully equipped with safety features of the overcharge protection using voltage, electric charge and temperature Battery deterioration is prevented by turning off the output after detecting wobbling and shock with vibration sensor Capable of seamless charging/discharging (high speed charging/discharging transfer control) (for PFX2512, 2532) High speed sampling with maximum 1 ms can be realized (for PFX2512, 2532) A 6 V range is newly installed and is capable of high-precision measurement (for PFX2512, 2532) LAN as standard equipment (for PFX2512, 2532) *In addition...

Four different power ratings - 165 W, 330 W, 660 W, and 1000 W - five models in total Support of 0-V input (PLZ164WA and PLZ664WA) High-speed response supporting a maximum slew rate of 16 A/µs (equivalent to 10 µs when converted to a rise time) Support of constant current, constant resistance, constant voltage, constant power, constant current + constant voltage, and constant resistance + constant voltage modes Timer functions combined with time/voltage measurement functions enable battery discharge characteristic evaluations. Booster units provide increased system capacity (PLZ1004W). Features sequence and switching functions. Provided with GPIB, RS232C, and USB 2.0 ports as standard.

Six operating modes are supported (constant current, constant resistance, constant voltage, constant power, constant current + constant voltage, constant resistance + constant voltage) Support of 0-V input (PLZ164WA and PLZ664WA) High-speed response supporting a maximum slew rate of 16 A/µs (equivalent to 10 µs when converted to a rise time) Timer functions combined with time/voltage measurement functions enable battery discharge characteristic evaluations. GPIB/RS232C/USB interface included as standard Equipped with various types of protection circuits: Over Voltage Protection(OVP), Over Current Protection(OCP), Over Power Protection(OPP), Over Heat Protection(OHP), Under Voltage Protection(UVP), And Reverse Connection Protection(REV) ※Discontinued / Limited Stock

Four different power ratings - 165 W, 330 W, 660 W, and 1000 W - five models in total Support of 0-V input (PLZ164WA and PLZ664WA) High-speed response supporting a maximum slew rate of 16 A/µs (equivalent to 10 µs when converted to a rise time) Support of constant current, constant resistance, constant voltage, constant power, constant current + constant voltage, and constant resistance + constant voltage modes Timer functions combined with time/voltage measurement functions enable battery discharge characteristic evaluations. Booster units provide increased system capacity (PLZ1004W). Features sequence and switching functions. Provided with GPIB, RS232C, and USB 2.0 ports as standard.

Six operating modes are supported (constant current, constant resistance, constant voltage, constant power, constant current + constant voltage, constant resistance + constant voltage) Support of 0-V input (PLZ164WA and PLZ664WA) High-speed response supporting a maximum slew rate of 16 A/µs (equivalent to 10 µs when converted to a rise time) Timer functions combined with time/voltage measurement functions enable battery discharge characteristic evaluations. GPIB/RS232C/USB interface included as standard Equipped with various types of protection circuits: Over Voltage Protection(OVP), Over Current Protection(OCP), Over Power Protection(OPP), Over Heat Protection(OHP), Under Voltage Protection(UVP), And Reverse Connection Protection(REV)

Six operating modes are supported (constant current, constant resistance, constant voltage, constant power, constant current + constant voltage, constant resistance + constant voltage) Support of 0-V input (PLZ164WA and PLZ664WA) High-speed response supporting a maximum slew rate of 16 A/µs (equivalent to 10 µs when converted to a rise time) Timer functions combined with time/voltage measurement functions enable battery discharge characteristic evaluations. GPIB/RS232C/USB interface included as standard Equipped with various types of protection circuits: Over Voltage Protection(OVP), Over Current Protection(OCP), Over Power Protection(OPP), Over Heat Protection(OHP), Under Voltage Protection(UVP), And Reverse Connection Protection(REV)

The PLZ-4WH SR/LP Series offers wide range of the "Large-Capacity DC Electronic Load System" that consists of the conventional electronic load model PLZ1004WH and PLZ2004WHB applying to the high voltage (maximum 650 V) installed in the exclusive rack mount system. *Refer to data sheet(pdf) for details

The PLZ-4WH SR/LP Series offers wide range of the "Large-Capacity DC Electronic Load System" that consists of the conventional electronic load model PLZ1004WH and PLZ2004WHB applying to the high voltage (maximum 650 V) installed in the exclusive rack mount system. *Refer to data sheet(pdf) for details

The PLZ-4WH SR/LP Series offers wide range of the "Large-Capacity DC Electronic Load System" that consists of the conventional electronic load model PLZ1004WH and PLZ2004WHB applying to the high voltage (maximum 650 V) installed in the exclusive rack mount system. *Refer to data sheet(pdf) for details

The PLZ-4WH SR/LP Series offers wide range of the "Large-Capacity DC Electronic Load System" that consists of the conventional electronic load model PLZ1004WH and PLZ2004WHB applying to the high voltage (maximum 650 V) installed in the exclusive rack mount system. *Refer to data sheet(pdf) for details

The PLZ-4WH SR/LP Series offers wide range of the "Large-Capacity DC Electronic Load System" that consists of the conventional electronic load model PLZ1004WH and PLZ2004WHB applying to the high voltage (maximum 650 V) installed in the exclusive rack mount system. *Refer to data sheet(pdf) for details

The PLZ-4WH SR/LP Series offers wide range of the "Large-Capacity DC Electronic Load System" that consists of the conventional electronic load model PLZ1004WH and PLZ2004WHB applying to the high voltage (maximum 650 V) installed in the exclusive rack mount system. *Refer to data sheet(pdf) for details

Capacities range from 5kW to 13kW, 2 types (SR/LP), 6 models in total Optimized design with dedicated parts. All assembly, distribution, calibration, etc. are completed before delivery, so the system can be put into operation immediately. The size of the Smart Rack (SR) is one of the smallest in the industry as a multifunctional, high-speed response type electronic load! The load pack (LP, 9kW/11kW) can be additionally equipped with a booster! (*Installation and adjustment are done by us) AC power supply is 90V to 250V automatic switching, 15A or less. No special wiring work is required. Guaranteed specifications for large capacity as well as small capacity inputs (test data included as standard). Digital interface (USB/RS-232C/GPIB) standard equipment Controllable by sequence...

Capacities range from 5kW to 13kW, 2 types (SR/LP), 6 models in total Optimized design with dedicated parts. All assembly, distribution, calibration, etc. are completed before delivery, so the system can be put into operation immediately. The size of the Smart Rack (SR) is one of the smallest in the industry as a multifunctional, high-speed response type electronic load! The load pack (LP, 9kW/11kW) can be additionally equipped with a booster! (*Installation and adjustment are done by us) AC power supply is 90V to 250V automatic switching, 15A or less. No special wiring work is required. Guaranteed specifications for large capacity as well as small capacity inputs (test data included as standard). Digital interface (USB/RS-232C/GPIB) standard equipment Controllable by sequence...

Capacities range from 5kW to 13kW, 2 types (SR/LP), 6 models in total Optimized design with dedicated parts. All assembly, distribution, calibration, etc. are completed before delivery, so the system can be put into operation immediately. The size of the Smart Rack (SR) is one of the smallest in the industry as a multifunctional, high-speed response type electronic load! The load pack (LP, 9kW/11kW) can be additionally equipped with a booster! (*Installation and adjustment are done by us) AC power supply is 90V to 250V automatic switching, 15A or less. No special wiring work is required. Guaranteed specifications for large capacity as well as small capacity inputs (test data included as standard). Digital interface (USB/RS-232C/GPIB) standard equipment Controllable by sequence...

Capacities range from 5kW to 13kW, 2 types (SR/LP), 6 models in total Optimized design with dedicated parts. All assembly, distribution, calibration, etc. are completed before delivery, so the system can be put into operation immediately. The size of the Smart Rack (SR) is one of the smallest in the industry as a multifunctional, high-speed response type electronic load! The load pack (LP, 9kW/11kW) can be additionally equipped with a booster! (*Installation and adjustment are done by us) AC power supply is 90V to 250V automatic switching, 15A or less. No special wiring work is required. Guaranteed specifications for large capacity as well as small capacity inputs (test data included as standard). Digital interface (USB/RS-232C/GPIB) standard equipment Controllable by sequence...

Capacities range from 5kW to 13kW, 2 types (SR/LP), 6 models in total Optimized design with dedicated parts. All assembly, distribution, calibration, etc. are completed before delivery, so the system can be put into operation immediately. The size of the Smart Rack (SR) is one of the smallest in the industry as a multifunctional, high-speed response type electronic load! The load pack (LP, 9kW/11kW) can be additionally equipped with a booster! (*Installation and adjustment are done by us) AC power supply is 90V to 250V automatic switching, 15A or less. No special wiring work is required. Guaranteed specifications for large capacity as well as small capacity inputs (test data included as standard). Digital interface (USB/RS-232C/GPIB) standard equipment Controllable by sequence...

Capacities range from 5kW to 13kW, 2 types (SR/LP), 6 models in total Optimized design with dedicated parts. All assembly, distribution, calibration, etc. are completed before delivery, so the system can be put into operation immediately. The size of the Smart Rack (SR) is one of the smallest in the industry as a multifunctional, high-speed response type electronic load! The load pack (LP, 9kW/11kW) can be additionally equipped with a booster! (*Installation and adjustment are done by us) AC power supply is 90V to 250V automatic switching, 15A or less. No special wiring work is required. Guaranteed specifications for large capacity as well as small capacity inputs (test data included as standard). Digital interface (USB/RS-232C/GPIB) standard equipment Controllable by sequence...

Dedicated to PLZ1004WH