This table is part of the specifications for:TOS5403
Item
Specifications
Number of programs
61
Number of steps
2
Test mode
The same settings as for single test settings are possible, except for the following. The same test can be selected consecutively.
Limit Voltage is fixed to the maximum rated value per test mode.
Test Time is fixed to ON.
In IR test, Lower is fixed to ON (only for models that support IR testing).
Fail judgment operation
The following operations are selectable:
Continue: All steps are executed even for a FAIL judgment.
Abort: Automatic test ends for a FAIL judgment.
Interval time between steps
0.1s to 100s
Step start condition
The following operations are selectable:
Immediate: When the INIT or INIT:TEST command is received via remote control, starts all steps consecutively.
BUS: Step 1 can be started using the software trigger from remote control. After it is completed, the operation pauses. When the command is then received again, Step 2 starts.
External: Step 1 starts upon performing the start operation. After a step is completed, the operation is paused. When you perform another start operation, step 2 starts.
Once: When you perform a start operation, all steps are executed consecutively.
