Pulse1-24V

KES7714

KES7714

  • Pulse1-24V
  • Full compliance with ISO 7637-2.2004, ISO 7637-2.2011, ISO 7637-3.2007, ISO 16750-2.2010
  • Load dump suppressor for pulse 5b
  • Compact modular cabinet
  • Output terminals provided at a height of 50mm above the floor level as specified in the ISO 7637-2 standard
  • Two types of CDNs available (60 V/50 A and 60 V/100 A)
  • Dedicated software for condition setting and tester control
  • JASO D001-94 pulse unit offered as an optional module

Overview

KES7711A, KES7713B and KES7714 generate test pulses 1 required by the ISO and SAE standards. Test pulse 1 is used to simulate the transient phenomenon that occurs when the power supply is cut off from the inductive load.

Pulse1-24V

Specifications

Specifications



ZOOM
ModelKES7713BKES7714
Pulse moduleExternal-connect type
Peak voltage (Us)±20 V to ±700 V, in steps of 0.1 V
Output impedance (Ri)20 Ω(SAE), 50 Ω(ISO)
Rise time (tr)1 μs (+0 μs, -0.5 μs)(SAE), 3 μs (+0 μs, -1.5 μs)(ISO)
Pulse width (td)1000 μs ± 200 μs at No Load / 50 Ω Load
Repetition interval (t1)0.5 s to 99 s, in steps of 0.1 s
DC cut time (t2)1 ms to 200 ms, in steps of 0.1 ms
Surge delay time (t3)Less than 100 μs
CDN capacityDC60Vmax 50AmaxDC60Vmax 100Amax
Input voltage100 VAC to 240 VAC 50/60 Hz
Power200VA
Dimensions440(17.32”)W×280(11.02”)H×595(23.42”)D mm
WeightApprox. 40 kg(88.18lbs)Approx. 42 kg(92.59lbs)

■ DC cut time can be set within a range of 1 ms to 200 ms. ■ Since it also outputs positive polarity waveforms whose polarity has been reversed, it supports not only ISO standards but also independent standards of automobile manufacturers as well. ■ Output impedance: Since 20 W and 50 W can be selected, it supports ISO7637-2.2004 standards and SAE J1113 standards.

Please feel free to contact us with any questions or concerns.

Download a Product Catalog View List
Request a Quotation Contact Us
close

Search

Entering the model number, capacity, etc.