Outline

The KRO Series are designed in accordance with both JIS Standards and EIA Standards. Since these racks are equipped with support angle as standard, even heavy products can be mounted. (With products weighing more than 70kg, use a rack with brackets.)

The KRO Series conforms both JIS and EIA standards simply replacing the front panel with the rear panel. Various Kikusui products can be easily mounted in a rack by using a bracket and rack mount frame, rack adaptor, etc. JIS standards (millimeter size) and EIA standards (inch size) racks are available. Brackets and rack mount frames, rack adaptors, etc. applicable to each type are also available.

Since the width of one panel is 50mm for JIS Standards and 44.45mm for EIA Standards, the bracket and rack mount frame, etc. of the panel width matched to the product body are selected based on one panel width. When using brackets to install models liable to give off heat, it is necessary to provide at least the minimum number of blank panels required for each model. Plate-type panels and mesh-type blank panels are also available.

*The KRO Series are sold in kit form.
*The support angle is designed for Kikusui racks and products. It is not interchangeable with products of the other manufacturer.
*The KRO Series payload weight can be increased to approximately 400 kg by changing the casters.
*Can be attached to suspension bolts.